Follow on G+

NCERT Solutions for Class 12 Physics Chapter 15 Communication Systems

NCERT PDF Solutions

NCERT Solutions for Class 12 Physics Chapter 15 Communication Systems

NCERT Solutions for Class 12 Physics Chapter 15 Communication Systems includes all the important topics with detailed explanation that aims to help students to understand the concepts better. Students who are preparing for their Study it Class 12 exams must go through StudyIt.in NCERT Solutions for Class 12 Physics Chapter 15 Communication Systems. Going through the solutions provided on this website will help you to know how to approach and solve the problems.

Students can also find NCERT in text on www.studyit.in, exercises and back of chapter questions. Also working on Class 12 Physics Chapter 15 Communication Systems NCERT Solutions will be most helpful to the students to solve their Homeworks and Assignments on time. Students can also download NCERT Solutions for Class 12 Physics Chapter 15 Communication Systems PDF to access them even in offline mode.

Class 12 Physics Chapter 15 Communication Systems


Question 1.
Which of the following frequencies will be suit-able for beyond-the-horizon communication using sky waves?
(a) 10 kHz
(b) 10 MHz
(c) 1 GHz
(d) 1000 GHz
Solution:
(b) : 10 MHz will be suitable frequency for sky waves as lower frequency of 10 kHz will require large radiating antenna and higher frequencies 1 GHz and 1000 GHz will pass through the ionosphere and will not be reflected by it.

Question 2.
Frequencies in the UHF range normally propagate by means of:
(a) Ground waves
(b) Sky waves
(c) Surface waves
(d) Space waves
Solution:
(d) : Frequencies in the UHF range normally propagates by means of space waves. The high frequency space waves are ideal for frequency modulation but do not bend with ground.

Question 3.
Digital signals
(i) do not provide a continuous set of values,
(ii) represent values as discrete steps,
(iii) can utilize binary system, and
(iv) can utilize decimal as well as binary systems.

Which of the above statements are true?
(a) (i) and (ii) only
(b) (ii) and (iii) only
(c) (i), (ii) and (iii) but not (iv)
(d) All of (i), (ii), (iii) and (iv).
Solution:
(c) : Decimal system represents a continuous set of values which cannot be utilized by digital signals.

Question 4.
Is it necessary for a transmitting antenna to be at the same height as that of the receiving antenna for the line of sight communication? A TV transmitting antenna is 81 m tall. How much service area can it cover if the receiving antenna is at the ground level?
Solution:
No, for line of sight communication, the two antenna may not be at the same height. Surface area
A=\pi { d }^{ 2 }=\pi \left( 2hR \right) =\cfrac { 22 }{ 7 } \times 2\times 81\times 6.4\times { 10 }^{ 6 }
=3258.5\times { 10 }^{ 6 }sq.metre=3258.5sq.km

Question 5.
A carrier wave of peak voltage 12 V is used to transmit a message signal. What should be the peak voltage of the modulating signal in order to have a modulation index of 75%?
Solution:
Modulation index, \mu =\cfrac { { A }_{ m } }{ { A }_{ c } } so, peak voltage
{ A }_{ m }={ \mu A }_{ c }=0.75\times 12=9V

Question 6.
A modulating signal is a square wave, as shown in Figure
NCERT Solutions for Class 12 Physics Chapter 15 Communication Systems 1
The carrier wave is given by c(t) = 2sin (8Ï€t) volts
(i) Sketch the amplitude modulated wave form
(ii) What is the modulation index?
Solution:
(i) The amplitude modulated wave is shown here’:
vedantu class 12 physics Chapter 15 Communication Systems 2
(ii) Modulation index, \mu \cfrac { { A }_{ m } }{ { A }_{ c } } =\cfrac { 1V }{ 2V } =0.5

Question 7.
For an amplitude modulated wave, the maximum amplitude is found to be 10 V while the minimum amplitude is found to be 2 V. Determine the modulation index, p. What would be the value of p if the minimum amplitude is zero volt?
Solution:
We know
Modulation index, \mu =\cfrac { { A }_{ m } }{ { A }_{ c } }
Also, minimum amplitude, { A }_{ min }={ A }_{ c }\left( 1-\mu \right)
Maximum amplitude, { A }_{ max }={ A }_{ c }\left( 1+\mu \right)
So, modulation index, \mu =\cfrac { { A }_{ max }{ -A }_{ min } }{ { A }_{ max }{ +A }_{ min } }
or \mu =\cfrac { 10-2 }{ 10+2 } =\cfrac { 8 }{ 12 } =2/3=0.67
if Amin = O, then modulation index, \cfrac { { A }_{ mix }-{ A }_{ min } }{ { A }_{ mix }+{ A }_{ min } } =\cfrac { 10-0 }{ 10+0 } =\cfrac { 10 }{ 10 } =1

Question 8.
Due to economic reasons, only the upper side band of an AM wave is transmitted, but at the receiving station, there is a facility for generating the carrier. Show that if a device is available which can multiply two signals, then it is possible to recover the modulating signal at the receiver station.
Solution:
Let, the received signal be cos(ωc + ωm)t The carrier signal available at the receiving station is Ac cos ωct Multiplying the two signals, we get A1Ac cos  (ωc + ωm)t cos ωct \cfrac { { A }_{ 1 }{ A }_{ c } }{ 2 } \left[ cos\left( 2{ \omega }_{ c }+{ \omega }_{ m } \right) t+cos{ \omega }_{ m }t \right] If this signal is passed through a low pass filter, we can recover the modulating signal \cfrac { { A }_{ 1 }{ A }_{ c } }{ 2 } cos{ \omega }_{ m }t

NCERT Solutions for Class 12 Physics

Tags:

Post a Comment

0 Comments

Please Comment